How to Put Down Landing Gear on Trailer UPDATED

How to Put Down Landing Gear on Trailer

What is a semi-trailer landing gear? The landing gear on a trailer supports the trailer in one case information technology has been removed from the semi-tractor. The landing gear are located on the front end of the trailer and there is a landing gear on each side of the front of the trailer, so they can support the trailer.

Most landing gears on trailers take two speeds, which are the low gear and the loftier gear.

The low gear is utilized for raising or lowering a loaded trailer while the high gear is used when the trailer is empty and information technology needs to be raised or lowered.

The high gear should simply be used when the 5th wheel is supporting the trailer'due south weight.

When Is the Landing Gear Raised?

The landing gear is raised when it is time to connect the 5th wheel to the trailer. The landing gear cranks has to raise the trailer, which is normally loaded.

Information technology usually takes approximately thirty turns or revolutions, but it depends on the top of the fifth wheel, the trailer's meridian, and depending on if the ground has any slope.

When Is The Landing Gear Lowered?

The landing gear is lowered when a trailer is being dropped/released from the fifth bike and the tractor.

High gear can exist used when lowering the landing gear if the trailer is empty.

When a driver is ready to lower the landing gear in high gear, the driver should exist facing the trailer and the driver should have one manus on the trailer for stability and support, so the other hand should be on the creepo of the landing gear.

How To Use The Landing Gear On a Trailer

To use the landing gear on a trailer the driver should be facing the trailer.

Scroll down to the two YouTube videos in this article to watch awesome, and accurate, videos showing how to raise and lower landing gear.

The driver should take i of their hands on the trailer for added support while the other manus is on the crank.

Information technology is better if the driver cranks the landing gear while facing the trailer, because this will keep your mitt on the crank firmly without your paw slipping off the crank.

The commuter should maintain a rubber stand while cranking the landing gear, and this will forbid dorsum and shoulder strains.

When the driver is using the low gear, they should be facing towards the front of the trailer, merely when the driver is using the loftier gear the driver needs to keep ane manus on the trailer for added security and support, so the other hand will be on the creepo.

Once you are washed lowering or raising the landing gear you lot need to make sure that the crank on the landing gear'south handle is placed backside the hook.

This will forestall an accident from occurring with the next driver.

Landing Gear Maintenance

Every truck driver needs to brand sure that they inspect the landing gear while y'all are doing your pre-trip inspection.  If you are new to trucking and are wondering what the pre-trip inspection is so read this article I wrote describing it.

The landing gear tin become wet in the gear, which can rust the landing gear and make it difficult to raise and lower.

The landing gear needs to have maintenance done, which includes lubrication.

The truck driver needs to brand certain at that place are no cracks with the landing gear, and if in that location is, then report this to a supervisor.

It is improve to exist prophylactic, then having whatever injuries occurring.

Practice yourself a favor and watch the video below that will teach you all most what you demand to do to prevent getting injured:

Cranking Landing Gear – Injury Prevention YouTube Video:

Landing Gear Functioning – YouTube Video:

Landing Gear Parts

The Trailer Parts Superstore is the place to become all your trailer landing gear parts.

They have over 3 decades of feel with trailer parts.

They specialize in replacement parts and repairs for commercial trailers.

Whatsoever parts you are looking for with your commercial trailers, the Trailer Parts Superstore is who you should contact.

They also provide technical assistance as well. Their website is: Trailer Parts Superstore.

DOWNLOAD HERE

How to Put Down Landing Gear on Trailer UPDATED

Posted by: michaellawaseneved.blogspot.com